Readers
Jantar readers offer a cost-effective security solution: multimode readers that are both user-friendly and powerful that support widely available 125kHz proximity cards. This provides our readers with the ability to read using wiegand formats as provided by other reader manufacturers. Card or key fob readers provide fast, secure access by either holding the card in front of the reader or simply just entering PIN codes. Designed for use both in interior and exterior environments built in IP56 housing, which are waterproof and can withstand harsh weather conditions.
Readers provide visual (LED) and audible (beeper) feedback to the user. In special cases they can be additionally protected against vandalism. Our access control system is designed in such a way that in the event of damage to the reader one still cannot open the door as the steering unit which contains steering logic and a local database of card users (access controller) is separated.
We use several types of readers in our access control systems. These readers are distinguished:
1. According to the type of identification means they are able to read
- R1 - read-only identification means readers C1 (EM Marin, 125kHz)
- R3 - read/write card readers C3 (Mifare, 13.56MHz)
- R4 - remote control readers C4 (433MHz)
- R5 - fingerprint readers
2. According to the type of communication between the reader and controllers
- D - direct, binary output (X), 64-bit; the reader does not have a processor of its own- the data read is decoded by the controller
- W - Wiegand protocol
- U - USB reader, power supply from the computer
3. By casing design
|
|
Type M
small dimensions, module for installation onto other devices including OEM, range 8-10cm. With communication cables coming from the side or the back.
|
|
|
Type I
narrow, upright casing, range 8-10cm.
|
|
|
Type I + K
narrow, upright casing with a keypad, range 8-10cm.
|
|
|
Type N - standard
standard casing, square shape, range 8-10cm (R1)
|
|
|
Type N - remote control receiver
standard casing with a built-in antenna, range up to 30m (R4).
|
|
|
Type R5
fingerprint reader for identification or verification, access control systems or for time and attendance registration.
|
|
|
Type L
UHF readers with a very long-range reading distance of 3-12m, intended for the purpose of reading specific UHF passive cards (866 MHz). Suitable for fast and secure automated vehicle identification or logistic systems as well in access control.
|
The type of the reader can be identified by its label:
|
|
|
|
R1D N-X |
C1 card reader (125kHz), direct, type N casing |
|
R3W+K N-72 |
C3 card reader (13,56MHz), Wiegand output, with a keypad, type N casing, 72-bit |
|
R1W W-26 |
C1 card reader, Wiegand output, type I casing, 26-bit |
|
R4W N-26 |
Remote control reader, type N casing, 26-bit |
|
|
|
Readers - controllers wiring diagram - USB
Readers - controllers wiring diagram - LAN/WLAN
